Ảnh sản phẩm thuộc về PNLAB

Thông tin chi tiết sản phẩm

Tên sản phẩm:

Mạch in 4 lớp 10x10 cm (10pcs)



Tình trạng:

liên hệ

Xuất xứ:


Hãng sản xuất:


Mã sản phẩm:

Đang cập nhật


600.000 1+ units
Đang cập nhật 10+ units
Đang cập nhật 100+ units

Giá cho 10 pcs

Pnlab cung cấp dịch vụ đặt mạch in 2-6 lớp giá cả hợp lý và cạnh tranh. số lượng đặt tối thiểu 5 tấm. thời gian giao hàng ổn định, chất lượng mạch in tốt. để đặt mạch in quý khách xuất ra file gerber và gửi cho Pnlab ( xem hướng dẫn xuất file Gerber tại đây http://ickeyvn.com/san-pham/717/tao-gerber-file.html ) tới mail : pnlabvietnam@gmail.com . chúng tối sẽ báo giá trong ngày.


Thông số kỹ thuật

Items Manufacturing Capabilities Remarks
Number of Layers Single-sided, double-sided, 4-layers, 6-layers Currently the maximum we can do is 6-layers.


Currently we only do FR-4 for our orders.
Maximum Board Size(Dimension) 420mm x 1200mm Most boards are within the size of 420mm x 550mm.
Board Size Tolerance(Outline) ±0.2mm/±0.5mm ±0.2mm for CNC routing, and ±0.5mm for V-scoring.
Board Thickness 0.4-2.0mm Currently we offer boards of 0.4/0.6/0.8/1.0/1.2/1.6/2.0mm.
Board Thickness Tolerance(t≥1.0mm) ±10% Normally “Plus Tolerance” will occur due to PCB processing steps such as electroless copper, solder mask and different types of finish on the pads.
Board Thickness Tolerance(t<1.0mm) ±0.1mm Normally “Plus Tolerance” will occur due to PCB processing steps such as electroless copper, solder mask and different types of finish on the pads.
Minimum Trace 6mil (0.15mm) Design larger traces when condition permits. For multi-layer PCBs, the minimum trace on inner-layer should be 0.175mm, and minimum trace on outer layer can still be 0.15mm.
Minimum Spacing 6mil (0.15mm) Design larger spacing if possible, minimum spacing is 0.15mm.
Finished Copper Thickness (Outer Layer) 35μm/70μm (1 OZ/2 OZ)  Also known as copper weight, 1 OZ equals 35μm, and 2 OZ equals 70μm
Finished Copper Thickness(Inner Layer) 17μm (0.5 OZ) Our finished copper weight for inner layer is 0.5 OZ which equals 17μm in thickness.
Drill Sizes (CNC) 0.3-6.3mm Regular drill sizes range from 0.3mm to 6.3mm. Extra charge may apply if larger than 6.3mm.
Minimum Annual Ring 0.153mm (6mil) Try to use bigger copper pad if possible, and the minimum annual ring is 0.153mm (6mil).
Finished Hole Diameter (CNC) 0.2mm-6.2mm Due to copper deposition/plating in the hole barrels, the finished hole diameter will be smaller than size of drill bits.
Tolerance of Finished Hole Size (CNC) ±0.08mm For example, if the drill size is 0.6mm, then the finished holes diameter ranging from 0.52mm to 0.68mm will be considered acceptable.
Solder Mask LPI Liquid Photo-imageable (LPI) is currently the most accepted solder mask in PCB manufacturing.
Minimum Character Width (Legend) 0.15mm Characters of less than 0.15mm wide will be too narrow and will be unreadable.
Minimum Character Height (Legend) 0.8mm Characters of less than 0.8mm high will be too small and will be unreadable.
Character Width to Height Ratio (Legend) 1:5 The ratio of 1:5 is the best and most popular one in PCB silkscreen legends processing.
Minimum Backset (Distance from Copper to Board Edge) 0.3mm (12mil) / 0.5mm (20mil) The minimum distance is 0.3mm for CNC routing, while the distance should be 0.5mm if you request V-scoring.
Minimum Diameter of Plated Half Holes 0.6mm For better connection between boards, we recommend to design this diameter to be at least 0.6mm.