Introduction

 

Overview

 

Front

 

Back

• The NanoPi2 is a high performance ARM Board developed by FriendlyARM for Hobbysts, Makers and Hackers for IOT projects. It features Samsung’s Cortex-A9 Quad Core S5P4418@1.4GHz SoC and 1G 32bit DDR3 RAM. It has built-in WiFi and Bluetooth which supports 802.11 b/g/n and Bluetooth 4.0. It boots Android and Debian from a TF card. It integrates an HDMI and LCD interface. Its adoption of the Raspberry Pi’s GPIO pin header makes it compatible with both Raspberry Pi’s external GPIO modules and Arduino’s shield boards. Its PCB dimension is 75 x 40 mm.

Features

• CPU: S5P4418, 1.4GHz
• RAM: 1GB DDR3
• Built in SDIO WiFi and Bluetooth module
• USB 2.0 Type A x 1
• Debug Serial Port/UART0 x 1
• microSD Slot x 2
• microUSB x 1: for data transmission and power input
• LCD Interface: 0.5 mm pitch SMT FPC seat, for full-color LCD (RGB: 8-8-8)
• HDMI: HDMI 1.4A, Type-A, 1080P60
• DVP Camera Interface: 0.5mm spacing FPC socket. It includes ITU-R BT 601/656 8-bit, I2C and IO
• GPIO: 2.54mm spacing 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, IO etc
• Button: User Button x 1, Reset Button x 1
• LED: LED for Power Indication x 1, User LED x 1
• PCB Dimension: 75 x 40mm
• Power: DC 5V/2A
• OS: Android, Debian

Diagram, Layout and Dimension

Layout

 

NanoPi 2接口布局

 

NanoPi 2 MicroSD

• GPIO Pin Spec

Pin#	Name	Pin#	Name
1	VDD_SYS_3.3V	2	VDD_5V
3	I2C0_SDA	4	VDD_5V
5	I2C0_SCL	6	DGND
7	GPIOB28	8	UART3_TXD
9	DGND	10	UART3_RXD
11	GPIOB29	12	GPIOB26
13	GPIOB30	14	DGND
15	GPIOB31	16	PWM2
17	VDD_SYS_3.3V	18	GPIOB27
19	SPI0_MOSI	20	DGND
21	SPI0_MISO	22	PWM0
23	SPI0_CLK	24	SPI0_CS
25	DGND	26	PWM1
27	I2C1_SDA	28	I2C1_SCL
29	GPIOC8	30	DGND
31	SPI2_CLK	32	GPIOC28
33	SPI2_CS	34	DGND
35	SPI2_MOSI	36	GPIOC7
37	SPI2_MISO	38	ALIVEGPIO2
39	DGND	40	ALIVEGPIO3

• Debug Port CON1（UART0）

Pin#	Name
1	DGND
2	VDD_5V
3	TXD0
4	RXD0

• DVP Camera Interface Pin Spec

Pin#	Name
1, 2	VDD_SYS_3.3V
7,9,13,15,24	DGND
3	SCL0
4	SDA0
5	GPIOB14
6	GPIOB16
8,10	NC
11	VSYNC
12	HREF
14	PCLK
16-23	Data bit7-0

• RGB LCD Interface Pin Spec

Pin#	Name
1, 2	VDD_5V
11，20，29, 37，38，39，40, 45	DGND
3-10	Blue LSB to MSB
12-19	Green LSB to MSB
21-28	Red LSB to MSB
30	GPIOB25
31	GPIOC15
32	XnRSTOUT Form CPU
33	VDEN
34	VSYNC
35	HSYNC
36	LCDCLK
41	SCL2
42	SDA2
43	GPIOC16
44	NC

Note

1. VDD_SYS_3.3V: 3.3V power output
2. VDD_5V: 5V power input/output. When the external device’s power is greater than the MicroUSB’s the external device is charging the board otherwise the board powers the external device. The input range is 4.7V ~ 5.6V
3. For more details please refer to the document：NanoPi-2-1507-Schematic.pdf

Board Dimension

For more details please refer to the document:NanoPi-2-1507-Dimesions(dxf).zip