Introduction

 

Overview

 

Front

 

Back

The NanoPi is a low power consumption, Samsung S3C2451 based ARM SOC that FriendlyARM developed for Linux hackers, makers and hobbyists. Its size is only half of the Raspberry Pi(RPi) and its GPIO pin is compatible with the RPi’s. The NanoPi integrates both the WiFi and Bluetooth 4.0. It has a DVP camera interface and full color LCD interface. It boots Linux/Debian quickly from a TF card. These features make it a good platform for applications in IOT, unmanned vehicles, robotics, image processing and human machine interaction.

Hardware Features

• CPU: Samsung S3C2451, 400Mhz
• RAM: 64M DDR2
• Integrated SDIO WiFi and Bluetooth
• USB Type A x1
• Debugging Serial Port x1
• microSD Slot x1
• microUSB x1: for power and data transmission. It can be configured as a serial port or Ethernet
• LCD Interface: 0.5 mm pitch SMT FPC seat, for full-color LCD (RGB: 8-8-8)
• DVP Camera interface：0.5mm spacing FPC socket. It includes ITU-R BT 601/656 8-bit, I2C and IO
• GPIO1: 2.54mm spacing 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, IO etc
• GPIO2: 2.54mm spacing 12pin. It includes I2S, I2C, UART etc.
• PCB dimension: 75 x 30 mm
• Power: DC 5V
• Bootloader and OS: u-boot, Linux-4.1, Debian8 jessie, Rabbit linux

Diagram, Layout and Dimension

Layout

 

NanoPi Layout

• GPIO1 Pin Spec

• GPIO2 Pin Spec

Pin#	Name	Pin#	Name
1	VDD_5V	2	VDD_SYS_3.3V
3	TXD2	4	RXD2
5	SDA0	6	SCL0
7	IISSDO0	8	IISSDI0
9	IISSCLK0	10	IISLRCK0
11	IISCDCLK0	12	DGND

• Debug Port CON1（UART0）

Pin#	Name
1	DGND
2	VDD_5V
3	TXD0
4	RXD0

• DVP Camera IF Pin Spec

Pin#	Name
1, 2	VDD_SYS_3.3V
7,9,13,15,24	DGND
3	SCL0
4	SDA0
5	GPH13
6	GPJ12
8	XCLK
10	NC
11	VSYNC
12	HREF
14	PCLK
16-23	Data bit7-0

• RGB LCD IF Pin Spec

Pin#	Name
1, 2	VDD_5V
11，20，29	DGND
3-10	Blue LSB to MSB
12-19	Green LSB to MSB
21-28	Red LSB to MSB
30	GPG12
31	GPG2
32	XnRSTOUT Form CPU
33	VDEN
34	VSYNC
35	HSYNC
36	LCDCLK
37，38，39，40	XM，XP，YM，YP

Note:

1. VDD_SYS_3.3V: 3.3V power output
2. VDD_5V: 5V power input/output. When the external device’s power is greater than the MicroUSB’s the external device is charging the board otherwise the board powers the external device. The input range is 4.7V ~ 5.6V
3. 3. For more details please refer to the document：NanoPi-1507-Schematic.pdf

Board Dimension

For more details please refer to the document：NanoPi-1507-Dimesions(dxf).zip