Special Microcontroller Features:
Analog Features:
-
-
Precision Internal Oscillator:
-
Factory calibrated to ±1%
-
Software selectable frequency range of 8 MHz to 32 kHz
-
Software tunable
-
Two-Speed Start-Up mode
-
Fail-safe clock monitoring for critical applications
-
Clock mode switching during operation for low-power operation
-
Power-Saving Sleep mode
-
Power-on Reset (POR)
-
Selectable Brown-out Reset (BOR) voltage
-
Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
-
In-Circuit Serial Programming™ (ICSP™) via two pins
-
In-Circuit Debug (ICD) via two pins
-
High-endurance Flash/EEPROM cell:
-
100,000 erase/write cycle enhanced Flash program memory, typical
-
1,000,000 erase/write cycle data EEPROM memory, typical
-
Data EEPROM retention > 40 years
-
Self-reprogrammable under software control
-
Programmable code protection
-
Peripheral Features:
-
Device Features:
-
1 input only pin
-
36 I/O
-
High sink/source current 25 mA
-
Interrupt-on-pin change option
-
Timers:
-
TMR0: 8-bit timer/counter with 8-bit prescaler
-
TMR1 enhanced: 16-bit timer/counter with prescaler, External Gate Input mode and dedicated low-power 32 kHz oscillator
-
TMR2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
-
Capture/Compare/PWM (CCP) module
-
Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering
-
Master Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability
-
Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module:
-
Supports RS-485, RS-232 and LIN compatibility
-
Auto-Baud Detect
-
Auto-wake-up on Start bit
-
Ultra Low-Power Wake-up (ULPWU)
-
10-bit 14 channel Analog-to-Digital (A/D) Converter
-
2 Analog Comparator modules with:
-
Programmable on-chip Voltage Reference (CVREF) module (% of VDD)
-
Fixed 0.6 Vref
-
Comparator inputs and outputs externally accessible
-
SR Latch mode
|