Hỗ trợ 24/24

Liên kết link

Quảng cáo liên kết

Ảnh sản phẩm thuộc về PNLAB

Thông tin chi tiết sản phẩm

Tên sản phẩm:

CC2451 Module

Giá:

60.000

Tình trạng:

10

Xuất xứ:

china

Hãng sản xuất:

Đang cập nhật

Mã sản phẩm:

CC2451 Module

60.000

60.000 1+ units
Đang cập nhật 10+ units
Đang cập nhật 100+ units
No Name Description CC2541 Pin Name (Description)
1 UART_TX UART Interface P1_6
2 UART_RX UART Interface P1_7
3 UART_CTS UART Interface P1_4
4 UART_RTS UART Interface P1_5
5 NC No connection  
6 NC No connection  
7 NC No connection P2_2 (Debug clock)
8 NC No connection P2_1 (Debug data)
9 NC No connection P2_0
10 NC No connection  
11 RESETB Reset if low longer than 100ms RESET_N
12 VCC 3.3v  
13 GND Ground  
14 GND Ground  
15 SCL I2C Interface 2
16 NC No connection  
17 NC No connection  
18 NC No connection  
19 NC No connection  
20 SDA I2C Interface 3
21 GND Ground  
22 GND Ground  
23 PIO0 System key P1_3
24 PIO1 System LED P1_2
25 PIO2 Programmable input/output line P1_1
26 PIO3 Programmable input/output line P1_0
27 PIO4 Programmable input/output line P0_7
28 PIO5 Programmable input/output line P0_6
29 PIO6 Programmable input/output line P0_5
30 PIO7 Programmable input/output line P0_4
31 PIO8 Programmable input/output line P0_3
32 PIO9 Programmable input/output line P0_2
33 PI10 Programmable input/output line P0_1
34 PI11 Programmable input/output line P0_0

Pulled from the HM-10 datasheet and referenced with the CC2541 datasheet. Note that sometime in the middle of 2014, HM-10s started shipping with CC2541s instead of CC2540s. The differences are minor.

To use with the CC Debugger, connect P2_1 (debug data), P2_2 (debug clock), RESETB, GND and VCC (only if you want the debugger to power the board). See the CC Debugger pinout here.

Other sources claim that some of the unconnected pins are PCM audio pins. This is false.